The Sound Devices 442 is a professional 4 input, portable audio mixer designed for mixing audio in film, ENG / EFP, video and broadcast applications. The mixer features 4 balanced 3-pin XLR inputs capable of accepting microphone and line signal (user switchable on every input). The output stage features stereo (L/R) XLR outputs with individually switchable mic, line or -10dB output impedance.
Every input features a dedicated “Direct Output”, which is used to distribute audio to external devices. +48V, +12V and +12V-T phantom power is available and is individually switchable on every channel. Each channel features peak limiter and low-cut filter dials as well as volume, gain and pan controls. Channels 1 & 2 can be linked for stereo monitoring or M-S stereo decoding. The unit is powered with 4 – AA alkaline batteries or external 5-18V DC.
FEATURES:
4 Balanced XLR Inputs
The mixer’s flexibility begins with it’s 4 balanced XLR inputs. All 4 inputs are individually switchable to accept line or microphone level signals.
Direct Outputs
Every input features a dedicated output via TA3-male connectors. The direct outs are ideal for feeding individual channel signal to external devices.
M-S Decoding
Channels 1-2 can be linked for stereo capturing and M-S stereo monitoring. Channel 1 features a phase reverse switch.
Variable Gain
Continuously variable gain allows level contouring on every channel, resulting in higher signal to noise ratio.
Variable Low-Cut Filter
Continuously variable low-cut filter dials are located on each channel, eliminating low frequency noise between 80 – 240Hz
Peak Limiting
Input and output peak limiters eliminate signal over load that can cause noise and distortion.
Inputs: 4 – Balanced 3-pin XLR male mic / line switchable
OUTPUT:
2 – (L/R) Stereo 3-pin XLR female
2 – (L/R) TA3 male
MONITOR/HEADPHONE OUT
Phones:
1/4″ TRS Phone female jack
1/8″ (3.5mm) mini female jack
ALT I/O
Direct Outputs:(1-4) TA3-male outputs
Tape Out / Mix Out: TA3-male output, 1/8″ (3.5mm) mini jack
Camera Out (RTN A): Hirose connector
RTN B: TA3-male output, 1/8″ (3.5mm) mini jack
LINK INPUT/OUTPUT
Mix In: TA3-male input
IMPEDENCE
Inputs:
2k ohms, XLR, mic setting, < 600 ohm Mics
16k ohms, XLR, line setting, < 2k ohm outputs
Outputs:
85 ohms (actual), XLR factory Line setting, > = 600 ohm inputs
150 ohms (actual), mic setting, < 600 ohm inputs
GAIN
XLR Inputs:
81dB, mic / 41dB, line line level setting
67dB, mic / 27dB, line -10dB setting
HUM & NOISE
EIN: -126dBu (-128dBV) maximum (22Hz - 22kHz bandwidth, flat filter, trim control fully up)
Frequency Response: 20Hz - 30kHz, +0.2, -0.5dB, -1dB @ 5Hz and 50kHz typical
Distortion: 0.007% typical (1 kHz, +4 dBu at line out)
0.09% max (50Hz - 20kHz, +18dBu @ line out, fader fully up)
Metering: Stereo (L/R) 20 segment, sunlight viewable LED meters
Control Voltage Out: No
Phantom Power: 12V, 12V-T & 48V
Operating Temperature: -20 degrees to 60 degrees Celsius, 0 to 95% relative humidity (non-condensing)
Storage Temperature: -40 degrees to 85 degrees Celsius
POWER
4 - AA alkaline batteries
Locking 4-pin Hirose connector, external DC power (5 - 18 VDC)
SIZE:
2.1" x 6.5" x 11"
53 x 165 x 279 mm
WEIGHT:
4.5 lbs (2.0 kg)
SOUND DEVICES 442
Call for Price - Day Rate
The Sound Devices 442 is a professional 4 input, portable audio mixer designed for mixing audio in film, ENG / EFP, video and broadcast applications. The mixer features 4 balanced 3-pin XLR inputs capable of accepting microphone and line signal (user switchable on every input). The output stage features stereo (L/R) XLR outputs with individually switchable mic, line or -10dB output impedance.
Every input features a dedicated “Direct Output”, which is used to distribute audio to external devices. +48V, +12V and +12V-T phantom power is available and is individually switchable on every channel. Each channel features peak limiter and low-cut filter dials as well as volume, gain and pan controls. Channels 1 & 2 can be linked for stereo monitoring or M-S stereo decoding. The unit is powered with 4 – AA alkaline batteries or external 5-18V DC.
FEATURES:
4 Balanced XLR Inputs
The mixer’s flexibility begins with it’s 4 balanced XLR inputs. All 4 inputs are individually switchable to accept line or microphone level signals.
Direct Outputs
Every input features a dedicated output via TA3-male connectors. The direct outs are ideal for feeding individual channel signal to external devices.
M-S Decoding
Channels 1-2 can be linked for stereo capturing and M-S stereo monitoring. Channel 1 features a phase reverse switch.
Variable Gain
Continuously variable gain allows level contouring on every channel, resulting in higher signal to noise ratio.
Variable Low-Cut Filter
Continuously variable low-cut filter dials are located on each channel, eliminating low frequency noise between 80 – 240Hz
Peak Limiting
Input and output peak limiters eliminate signal over load that can cause noise and distortion.
Specifications
Inputs: 4 – Balanced 3-pin XLR male mic / line switchable
OUTPUT:
2 – (L/R) Stereo 3-pin XLR female
2 – (L/R) TA3 male
MONITOR/HEADPHONE OUT
Phones:
1/4″ TRS Phone female jack
1/8″ (3.5mm) mini female jack
ALT I/O
Direct Outputs:(1-4) TA3-male outputs
Tape Out / Mix Out: TA3-male output, 1/8″ (3.5mm) mini jack
Camera Out (RTN A): Hirose connector
RTN B: TA3-male output, 1/8″ (3.5mm) mini jack
LINK INPUT/OUTPUT
Mix In: TA3-male input
IMPEDENCE
Inputs:
2k ohms, XLR, mic setting, < 600 ohm Mics 16k ohms, XLR, line setting, < 2k ohm outputs Outputs: 85 ohms (actual), XLR factory Line setting, > = 600 ohm inputs
150 ohms (actual), mic setting, < 600 ohm inputs GAIN XLR Inputs: 81dB, mic / 41dB, line line level setting 67dB, mic / 27dB, line -10dB setting HUM & NOISE EIN: -126dBu (-128dBV) maximum (22Hz - 22kHz bandwidth, flat filter, trim control fully up) Frequency Response: 20Hz - 30kHz, +0.2, -0.5dB, -1dB @ 5Hz and 50kHz typical Distortion: 0.007% typical (1 kHz, +4 dBu at line out) 0.09% max (50Hz - 20kHz, +18dBu @ line out, fader fully up) Metering: Stereo (L/R) 20 segment, sunlight viewable LED meters Control Voltage Out: No Phantom Power: 12V, 12V-T & 48V Operating Temperature: -20 degrees to 60 degrees Celsius, 0 to 95% relative humidity (non-condensing) Storage Temperature: -40 degrees to 85 degrees Celsius POWER 4 - AA alkaline batteries Locking 4-pin Hirose connector, external DC power (5 - 18 VDC) SIZE: 2.1" x 6.5" x 11" 53 x 165 x 279 mm WEIGHT: 4.5 lbs (2.0 kg)
Related products
MACKIE 12 CHANNEL
Call for Price - Day Rate Call for PriceMACKIE ONYX 1640 ANALOG MIXER
Call for Price - Day Rate Call for PriceYAMAHA DM1000V2 DIGITAL MIXER
Call for Price - Day Rate Call for Price