The Sennheiser MKH 50 Microphone is a high quality, professional condenser microphone specifically designed for spot capturing in recording and sound reinforcement applications. The MKH 50 offers exceptional attenuation at the lateral sections of the capsule, for a focused pick up without off-axis noise. Its wide frequency response and high sensitivity result in pristine audio fidelity, no matter the source. It also has a low-frequency roll-off switch to minimize rumble/noise, and a pre-attenuation switch in case you’ll mount the microphone near to high transients. The MKH 50 use +48V Phantom Power, and is more than suitable for capturing vocals or instruments in recording or sound reinforcement.
FEATURES:
A pressure gradient condenser mic specifically created for spot recording
Supercardioid polar pattern to provide focused capture and extreme off-axis rejection
Low frequency roll-off switch to minimize rumble and noise
Switchable pre-attenuation provides an additional 10dB of headroom to prevent distortion from close-proximity transient signals
Uses +48V Phantom Power
Transducer: Condenser
Polar Pattern: Super-cardioid
Frequency Response: 40Hz to 20kHz
Dynamic Range (Typical): Not Specified by Manufacturer
Signal-to-Noise Ratio: 12 (18) dB
Maximum Input Sound Level: SPL 134 (142) dB at 1 kHz
Power Requirements: 48 V Phantom Power +/- 4V
Output Impedance: Nominal: 150 ohms
Min. terminating: 1000 ohms
Output Connectors: 3-pin XLR male
Pad: -10dB
Low Frequency Roll-Off: Yes
SENNHEISER MKH-50 SHOTGUN MIC
Call for Price
The Sennheiser MKH 50 Microphone is a high quality, professional condenser microphone specifically designed for spot capturing in recording and sound reinforcement applications. The MKH 50 offers exceptional attenuation at the lateral sections of the capsule, for a focused pick up without off-axis noise. Its wide frequency response and high sensitivity result in pristine audio fidelity, no matter the source. It also has a low-frequency roll-off switch to minimize rumble/noise, and a pre-attenuation switch in case you’ll mount the microphone near to high transients. The MKH 50 use +48V Phantom Power, and is more than suitable for capturing vocals or instruments in recording or sound reinforcement.
FEATURES:
A pressure gradient condenser mic specifically created for spot recording
Supercardioid polar pattern to provide focused capture and extreme off-axis rejection
Low frequency roll-off switch to minimize rumble and noise
Switchable pre-attenuation provides an additional 10dB of headroom to prevent distortion from close-proximity transient signals
Uses +48V Phantom Power
Description
Transducer: Condenser
Polar Pattern: Super-cardioid
Frequency Response: 40Hz to 20kHz
Dynamic Range (Typical): Not Specified by Manufacturer
Signal-to-Noise Ratio: 12 (18) dB
Maximum Input Sound Level: SPL 134 (142) dB at 1 kHz
Power Requirements: 48 V Phantom Power +/- 4V
Output Impedance: Nominal: 150 ohms
Min. terminating: 1000 ohms
Output Connectors: 3-pin XLR male
Pad: -10dB
Low Frequency Roll-Off: Yes
SIZE:
6.02″ x 0.98″
153 x 25 mm
WEIGHT:
0.22 lb (0.1 kg)
Related products
TABLE TOP STAND W/ 18″ GOOSENECK
Call for Price Read moreRIEDEL RSP 2318 SMART PANEL
Call for Price Read moreModel 230 Announcer’s Console
Call for Price Read morePSC BOOM POLE
Call for Price Read moreSENNHEISER MKH-60 SHOTGUN MIC
Call for Price Read moreTABLE TOP STAND
Call for Price Read moreELECTRO VOICE RE50/B HANDHELD MIC
Call for Price Read moreBEYERDYNAMIC M58 HANDHELD MIC
Call for Price Read moreSENNHEISER MKH-416 SHOTGUN MIC
Call for Price Read morePSC BOOM POLE W/MIC
Call for Price Read more