The Riedel CCP-1116 is a new commentary unit for two commentators with integrated intercom functionality. The device provides up to two commentary positions with high-quality mic pre-amps and all the intercom features known from Riedel Artist Digital Matrix Intercom systems.
Combined in one compact device and cabled via one single CAT5 or COAX cable, the CCP-1116 reduces cabling effort, set-up time and points of failure. In addition the CCP-1116 provides a clearly arranged user interface with improved functionality at the commentary position including programmable buttons for communications and GPIOs as well as remote control of the commentary panel.
FEATURES:
High quality microphone preamplifier with 48V supply, transformer balanced input, low-cut, +6dBu Limiter and level meter
All line inputs electronically balanced, all line outputs transformer balanced
Large illuminated pushbutton switches for ON AIR and COUGH/MIC MUTE
16 free programmable intercom keys with 8 character high-res OLED displays
Additional programmable and remote controllable mono line input (e.g. to feed local playback sources) and speaker output
High-quality headphone amplifier with monitor mix section: 3 source level controls, side-tone and overall level
Elaborated split-ear operation for commentary headphones: all sources routable
Connectors for two commentary headsets and two additional intercom headsets
Integrated speaker and removable gooseneck microphone for intercom operation
Stand-alone/emergency mode operation
Power-supply redundancy via DC connector
Quick and easy set-up
Audio Line Output (DIRECT OUT A, DIRECT OUT B, AIR A
OUT, AIR B OUT, AIR A+B OUT)
Coupling: Transformer
Impedance: >/= 50 ohm
Maximum Output Level: +18dBu
Nominal Output Level: +6dBu
Output Noise Voltage: -100dBu (20Hz-22kHz)
THD+N: <0.02% (+6dBu, 1kHz),
<0.2% (+6dBu, 40Hz)
Headphone (PHONE A, PHONE B)
Load: >25?
Maximum Output Level: +25dBu
Output Noise Voltage: -75dBu
THD+N: <0.05% (+18dBu, 1kHz)
Connectors (front)
Phones A: Headphones connector (Stereo 6.3mm) for commentary headphone A
MIC A: High-quality microphone input (XLR3) for commentary microphone with 48V phantom power (switchable), adjustable gain (control on the rear side), integrated limiter for On-Air signal
Headset A Intercom:
Headset Connector (XLR4) for Intercom
Headset A (dynamic or electret microphone)
Headset B Intercom:
Headset Connector (XLR4) for Intercom
Headset B (dynamic or electret microphone)
MIC B: High-quality microphone input (XLR3) for commentary microphone with 48V phantom power (switchable), adjustable gain (control on the rear side), integrated limiter for On-Air signal
Phones B: Headphones connector (Stereo 6.3mm) for commentary headphones B
SIZE:
N/A
WEIGHT:
N/A
RIEDEL COMMENTATOR PANEL – ARTIST CCP-1116
Call for Price - Day Rate
The Riedel CCP-1116 is a new commentary unit for two commentators with integrated intercom functionality. The device provides up to two commentary positions with high-quality mic pre-amps and all the intercom features known from Riedel Artist Digital Matrix Intercom systems.
Combined in one compact device and cabled via one single CAT5 or COAX cable, the CCP-1116 reduces cabling effort, set-up time and points of failure. In addition the CCP-1116 provides a clearly arranged user interface with improved functionality at the commentary position including programmable buttons for communications and GPIOs as well as remote control of the commentary panel.
FEATURES:
High quality microphone preamplifier with 48V supply, transformer balanced input, low-cut, +6dBu Limiter and level meter
All line inputs electronically balanced, all line outputs transformer balanced
Large illuminated pushbutton switches for ON AIR and COUGH/MIC MUTE
16 free programmable intercom keys with 8 character high-res OLED displays
Additional programmable and remote controllable mono line input (e.g. to feed local playback sources) and speaker output
High-quality headphone amplifier with monitor mix section: 3 source level controls, side-tone and overall level
Elaborated split-ear operation for commentary headphones: all sources routable
Connectors for two commentary headsets and two additional intercom headsets
Integrated speaker and removable gooseneck microphone for intercom operation
Stand-alone/emergency mode operation
Power-supply redundancy via DC connector
Quick and easy set-up
Specifications
Power
Internal power-supply: 90-253V AC (47-63Hz)
Power supply redundancy via input for external power: 10-16V DC via XLR4
Microphone Input (MIC A IN, MIC B IN)
Coupling: Transformer
Phantom Power: 48V
Gain Range: 10-70dB
Gain Switch: -20dB
Maximum Input Level: +6dBu
High-Pass Filter: 100Hz
Limiter: @ +6dBu
Input Noise Voltage: -126dBu @ 200 ohm Source
CMRR: >60dB @ 1kHz
Audio Line Input (AUX 1 IN, AUX 2 IN)
Coupling: Transformer
Impedance: >/= 10k ohm
Maximum Input Level: +18dBu
Nominal Input Level: +6dBu
Input Noise Voltage: -73dBu (20Hz-22kHz)
THD+N: <0.1% (+18dBu, 1kHz) CMRR: >60dB @ 1kHz
Audio Line Input (LINE IN)
Coupling: Electrically balanced
Impedance: >/= 10k ohm
Input Level: -10 … +18dBu
Nominal Input Level: +6dBu
Input Noise Voltage: -73dBu (20Hz-20kHz)
THD+N: <0.2% (<0.05% @ 1kHz) SNR: >91dB
Audio Line Output (DIRECT OUT A, DIRECT OUT B, AIR A
OUT, AIR B OUT, AIR A+B OUT)
Coupling: Transformer
Impedance: >/= 50 ohm
Maximum Output Level: +18dBu
Nominal Output Level: +6dBu
Output Noise Voltage: -100dBu (20Hz-22kHz)
THD+N: <0.02% (+6dBu, 1kHz), <0.2% (+6dBu, 40Hz) Headphone (PHONE A, PHONE B) Load: >25?
Maximum Output Level: +25dBu
Output Noise Voltage: -75dBu
THD+N: <0.05% (+18dBu, 1kHz) Connectors (front) Phones A: Headphones connector (Stereo 6.3mm) for commentary headphone A MIC A: High-quality microphone input (XLR3) for commentary microphone with 48V phantom power (switchable), adjustable gain (control on the rear side), integrated limiter for On-Air signal Headset A Intercom: Headset Connector (XLR4) for Intercom Headset A (dynamic or electret microphone) Headset B Intercom: Headset Connector (XLR4) for Intercom Headset B (dynamic or electret microphone) MIC B: High-quality microphone input (XLR3) for commentary microphone with 48V phantom power (switchable), adjustable gain (control on the rear side), integrated limiter for On-Air signal Phones B: Headphones connector (Stereo 6.3mm) for commentary headphones B SIZE: N/A WEIGHT: N/A
Related products
COUNTRYMAN B6 WATER RESISTANT
Call for Price - Day Rate Call for PriceYAMAHA RIO 3224-D
Call for Price - Day Rate Call for PriceLECTROSONICS PLUG ON TRANSMITTER UH200C
Call for Price - Day Rate Call for Price