Press shows individual battery capacity as a percentage of full, in 1% increments. The display maintains its accuracy by tracking the performance, and adjusting calibration values to compensate for the ageing of the cells.
PAGlink batteries are firmware upgradeable. The program can be updated in the field by the user, in a matter of seconds, without opening the battery case. An update can be supplied by PAG, or your dealer, which enables you to benefit from the technological advances that PAG introduces to accommodate developments in camera and charger technology.
PAGlink is the right battery system for increasingly computerized cameras of today; it makes other battery systems seem crude by comparison.
The PAGlink HC-PL94T battery features long-life, premier-quality, high-current Li-Ion cells, which have no memory effect, and are completely recyclable. In keeping with the PAG total battery design philosophy the HC-PL94T is designed and constructed to provide the longest possible working life.
The battery case is manufactured from high-impact, injection-moulded polycarbonate, which is inherently very strong and also used for motorcycle crash helmets. Additionally, the internal case design protects the cell-pack against damaging impact.
The advanced electronic protection system of the battery is fail-safe and features an electrolyte-resistant coating.
Enhanced low temperature performance allows PAGlink batteries to operate at -20C.
FEATURES:
– 94 watt-hours, 14.8V 6.4Ah
– Rechargeable Gold-Mount (Snap-On, 3-Stud) compatible Li-Ion battery
– Batteries in any state of charge can be linked to combine capacities (2 = 188Wh, 3 = 282Wh)
– Current draw capability of 12A when linked (10A individually)
– Hot-swap for continuous power
– Numeric run-time and capacity display
– Smaller, lighter Li-Ion batteries with a higher energy density
– Intelligent batteries that communicate and manage their own charge and discharge safely
– Charge batteries individually or linked on Anton/Bauer Li-Ion chargers
– Auto-compatible with same camera data system and in-viewfinder capacity display as Anton/Bauer batteries
– Battery firmware can be updated externally
– UN tested and flight-friendly
High-impact polycarbonate injection mouldings designed to protect the
cells from impact damage. The battery case is sealed to maintain the
integrity of the UN tested build standard.
Replaceable Contact Assemblies:
The front and rear contact assemblies are external to the battery case and can be replaced in the event of damage.
PAGLINK HC-PL94T BATTERY
Call for Price - Day Rate
Press shows individual battery capacity as a percentage of full, in 1% increments. The display maintains its accuracy by tracking the performance, and adjusting calibration values to compensate for the ageing of the cells.
PAGlink batteries are firmware upgradeable. The program can be updated in the field by the user, in a matter of seconds, without opening the battery case. An update can be supplied by PAG, or your dealer, which enables you to benefit from the technological advances that PAG introduces to accommodate developments in camera and charger technology.
PAGlink is the right battery system for increasingly computerized cameras of today; it makes other battery systems seem crude by comparison.
The PAGlink HC-PL94T battery features long-life, premier-quality, high-current Li-Ion cells, which have no memory effect, and are completely recyclable. In keeping with the PAG total battery design philosophy the HC-PL94T is designed and constructed to provide the longest possible working life.
The battery case is manufactured from high-impact, injection-moulded polycarbonate, which is inherently very strong and also used for motorcycle crash helmets. Additionally, the internal case design protects the cell-pack against damaging impact.
The advanced electronic protection system of the battery is fail-safe and features an electrolyte-resistant coating.
Enhanced low temperature performance allows PAGlink batteries to operate at -20C.
FEATURES:
– 94 watt-hours, 14.8V 6.4Ah
– Rechargeable Gold-Mount (Snap-On, 3-Stud) compatible Li-Ion battery
– Batteries in any state of charge can be linked to combine capacities (2 = 188Wh, 3 = 282Wh)
– Current draw capability of 12A when linked (10A individually)
– Hot-swap for continuous power
– Numeric run-time and capacity display
– Smaller, lighter Li-Ion batteries with a higher energy density
– Intelligent batteries that communicate and manage their own charge and discharge safely
– Charge batteries individually or linked on Anton/Bauer Li-Ion chargers
– Auto-compatible with same camera data system and in-viewfinder capacity display as Anton/Bauer batteries
– Battery firmware can be updated externally
– UN tested and flight-friendly
Specifications
PAG Model Number: 9306
Connector Type: 3-Stud/Snap-on/Gold Mount
Run-Time & Capacity Display:
On-load, run-time is expressed in hours
and minutes, to a resolution of 1 minute.
Capacity is expressed as a percentage, to
a resolution of 1%.
Construction:
High-impact polycarbonate injection mouldings designed to protect the
cells from impact damage. The battery case is sealed to maintain the
integrity of the UN tested build standard.
Replaceable Contact Assemblies:
The front and rear contact assemblies are external to the battery case and can be replaced in the event of damage.
Cell-Technology:
Premium grade, high-current, sealed, Lithium-Ion rechargeable cylindrical cells.
Voltage:
14.8V nominal. 12 cells connected in series/
parallel. Each cell has a nominal voltage of
3.7V.
Capacity:
Nominal 6.4 ampere-hours (94 watt-hours)
Output Current:
Individual rated maximum continuous
output current 10 amperes (12 amperes for
two or more linked batteries).
Charge Voltage: 16.8V
Charge Times:
Dependent on the battery state of charge,
the charger and the firmware version.
The times given are for fully-discharged
batteries, charged using an Anton/Bauer
sequential Quad Charger
Protection:
The battery incorporates the following
safety shutdown systems:
3 over-current shutdown systems
2 over-voltage shutdown systems
2 under-voltage shutdown systems
3 thermal shutdown systems, including non-resetting thermal fuse
The protection circuit within the battery has an electrolyte resistant coating.
Firmware Updates:
Battery firmware can be updated in the
field by the user, in a matter of seconds,
via the battery contacts. An update tool
can be supplied by PAG or your dealer.
Updates enable you take advantage of the
technological advances that PAG introduces
to accommodate developments in camera
and charger technology.
Temperature Range:
Charging:
32F to 113F (Optimum 50F to 104F)
0C to +40C (Optimum +10C to +30C)
Discharging:
-4F to +122F (Optimum 41F to 104F)
-20C to +50C (Optimum +5C to +40C)
Storage:
14F to 104F (Optimum 32F to 68F)
-10C to +40C (Optimum 0C to +20C)
SIZE:
129 x 87 x 58mm
5.00 x 3.42 x 2.25″
WEIGHT:
1.6lbs (735g)
Related products
SONY PDW-850
Call for Price - Day Rate Call for PriceARRI AMIRA PREMIUM
Call for Price - Day Rate Call for PriceSONY HVR-A1U
Call for Price - Day Rate Call for Price