The design of the Lectrosonics T1 IFB transmitter includes 256 frequencies user selectable in 100 kHz steps to alleviate interference problems in traveling venues. The T1 IFB transmitter is a rugged, machined aluminum package. The input section is adjustable for virtually any microphone or line level audio source. Level indicating LEDs are provided on the control panel to make level settings quick and accurate, without having to view the receiver. The antenna is a detachable, locking 1/4 wavelength flexible bronze cable that connects to a 50 Ohm BNC connector on the transmitter.
FEATURES:
Audio Input Interface
Audio Processor
Compander Noise Reduction
Pilot Tone
Frequency Synthesize
Power Delay
Microcontroller
Antenna System
LECTROSONICS IFB TRANSMITTER T1
Call for Price - Day Rate
The design of the Lectrosonics T1 IFB transmitter includes 256 frequencies user selectable in 100 kHz steps to alleviate interference problems in traveling venues. The T1 IFB transmitter is a rugged, machined aluminum package. The input section is adjustable for virtually any microphone or line level audio source. Level indicating LEDs are provided on the control panel to make level settings quick and accurate, without having to view the receiver. The antenna is a detachable, locking 1/4 wavelength flexible bronze cable that connects to a 50 Ohm BNC connector on the transmitter.
FEATURES:
Audio Input Interface
Audio Processor
Compander Noise Reduction
Pilot Tone
Frequency Synthesize
Power Delay
Microcontroller
Antenna System
Specifications
Operating Frequencies:
Block 21 537.600 – 563.100
Block 22 563.200 – 588.700
Block 23 588.800 – 607.900, 614.100 – 614.300
Block 24 614.400 – 639.900
Block 25 640.000 – 665.500
Block 26 665.600 – 691.100
Block 27 691.200 – 716.700
Block 28 716.800 – 742.300
Block 29 742.400 – 767.900
Frequencies (Channels per block): 256
Channel Spacing: 100 kHz (0.1 MHz)
Spurious & Harmonic Suppression: 1 uW at freq. above 1 GHz, 4 nW at freq. below 1 GHz
Frequency Stability: .002% (20 ppm) @ 25 C
Temperature Stability: .005% (50 ppm) from -30 C to +50 C
Channel Selection: Momentary pushbutton switches, TUNE Up and Down
Pilot Tone: 29.997 kHz
Modulation: FM, 20 kHz deviation
Audio Response: 100 Hz to 10 kHz, 1 dB, -3dB (system response)
Audio Compressor: 2 to 1
RF Power Output: 250 mw (nominal)
Output Impedance: 50 ohms
Audio Input Levels: +4 dBu, -6 dBu, and -40 dBu, dry inputs, +/-50Vdc max,
rear panel selectable for Line, Mic, RTS 1, RTS 2, and Clear Comm
Audio Input Config: Balanced and Unbalanced, rear panel selectable for Line, Mic. RTS 1, RTS 2, and Clear Comm
Audio Input Impedance: Greater than 2 K balanced, greater than 1 K unbalanced at any gain setting
Gain Control Range: 43 dB, Semi-log Rotary control
Audio Input Jack: Standard XLR female connector
Input Power: 12 to 14 VDC typical, 250 ma. max.; Max. Input Range 11 to 18 VDC
Power Input Jack: Coax type, locking LZR RL26AE
Indicators:
LED for -20 dB modulation
LED for 0 dB modulation
4 Digit 7-segment LED displays for frequency and power on
with adjustable brightness
Front panel controls:
Audio Level rotary knob
Power OFF-TUNE-XMIT, 3 position slide switch
TUNE up momentary pushbutton switch
TUNE down momentary pushbutton switch
Rear panel controls: Mode Select, 4 section DIP switch
SIZE:
Including Connectors:
5.25″ x 3.25″ x 1.25″
133.4 x 82.6 x 31.8 mm
WEIGHT:
0.56 lb (0.3 kg)
Related products
WENDT X4
Call for Price - Day Rate Call for PriceEP5AV “RABBIT” EARPHONE W/ EARLOOP
Call for Price - Day Rate Call for PriceCOMTEK BST-25 BASE STATION TRANSMITTER
Call for Price - Day Rate Call for Price