The 5601MSC Master Sync and Clock Generator is a broadcast quality, master sync pulse generator (SPG) and a master clock. It provides all of the synchronizing signals needed in a 21st century TV station or post production facility at the same time as solving the problem of locking the in-house master clock system to the master video sync pulse generator.
A high stability, temperature controlled oscillator, provides the 5601MSC with better than 1.0×10-8 (or 0.01ppm) frequency reference. The free running drift of this 10MHz reference will be less than 0.1Hz (which amounts to less than one millisecond time drift per day). This guarantees that any frequency drift, with time and temperature, will be within the tolerances expected from the best SPGs or master clocks available in the industry. The 5601MSC may also be referenced to an external 5MHz or 10MHz master oscillator if higher stability is required. Both the SPG and the Master Clock section of the 5601MSC may be referenced to high stability time and frequency standards present in the Global Position System (GPS) by adding the GPS option (+GP). The 5601MSC may also be referenced to high stability time and frequency standards present in the Global Navigation Satellite System (GLONASS) by adding the GPS/GLONASS option (+GPSG).
The SPG section of the 5601MSC provides six timeable reference outputs. These six BNC outputs may be configured to provide independently timed color black (black burst) outputs or independently timed HDTV tri-level sync outputs. Each color black output can optionally carry vertical interval time code (VITC) on a user specified set of lines. Additionally, each output can provide 10MHz, 5MHz, PAL Subcarrier, NTSC Subcarrier, 1 PPS, 1/1.001 PPS, 6/1.001 PPS, PAL color frame pulse and 48kHz wordclock.
PAL color frame, 1Hz pulse, IR1G DATUM 1/1.001Hz pulse, 6/1.001Hz pulse
CW Signals
5MHz, 10MHz, NTSC-M Subcarrier, PAL-B Subcarrier
Wordclock
48kHz Wordclock
Connector
6 BNC per IEC 61169-8 Annex A
Number of Outputs
6
DC Offset
0V ±0.05V
Return Loss
> 40dB up to 10MHz
SNR
> 75dB rms
10MHz Output
Output Levels
1.0V p-p, 2.0V p-p, in 75? selectable
Connector
BNC per IEC 61169-8 Annex A
Output Type
10MHz sine wave (default), all other analog sync standards (see above) selectable
SNR
> 70dB rms
SFDR
> 50dBc
Wordclock Output
Output Type
48kHz Wordclock (default), all other analog sync standards (see above) selectable
Connector
BNC per IEC 61169-8 Annex A
Risetime
< 25ns
Levels
5V CMOS (1k?) or ±1V (75?)
LTC Outputs
Standard
SMPTE ST 12-1 or IRIG-B
Frame Rate
24, 25, 30 and 29.97 (drop frame and non-drop frame)
Number of Outputs
2 balanced
Connectors
3-pin male XLR type, Female DB-15
Level
Un-powered
Adjustable, 1.0V to 8.0V p-p, balanced
Powered
2V p-p with 11V DC offset to drive downstream 1200 series slave clocks on LTC1 only
Output Impedance
44? balanced (un-powered)
Rise Time
40 ±10µs
Jitter
< 2µs
IRIG Input/OutputsWith +IRIG option installed
Standard
IRIG 200-04 B122, B123, B126, B127
Number of Outputs
2, shared with LTC, may be both LTC, 1LTC-1IRIG, both IRIG
Connectors
3 pin male XLR type, Female DB-15
Level
1.0-8.0 p-p, balanced
Output Impedance
44? balanced
LTC Input
Standard
SMPTE ST12-1 or IRIG-B
Number of Inputs
1 balanced
Connector
Female DB-15
Input Impedance
> 30k? balanced
Sensitivity
0.25V p-p min
Communications and Control
Serial Port
Connector
Female DB-9
Level
RS-232
Baud Rate
115200 baud
Format
8 data bits, no parity, 2 stop bits
GPS/GLONASS ReceiverWith +GP or +GPSG option installed
Temperature
-40°C to +70°C
Humidity
95% R.H. Condensing at 60°C
Dimensions
3.74″ D x 2.85″ H (100mm x 72mm)
ModemWith +M option installed
Connector
RJ-11 telephone jack
Baud Rate
300/1200 baud Bell 103 compatible
Ethernet
Network Type
Fast Ethernet 100 Base-TX IEEE 802.3u standard for 100MB/s baseband CSMA/CD local area network
Ethernet 10 Base-T IEEE 802.3 standard for 10MB/s baseband CSMA/CD local area network
Connector
RJ-45
Function
VistaLINK® control
NTP port with +T option installed
NTP PortWith +T option installed
Standard
NTP V4 compliant, broadcast and server mode support
Time must be referenced to GPS, LTC, VITC or have been synchronized via modem within the last 10 days (as per RFC1305)
SNTP Input
NTP V4 compliant
PTP/IEEE-1588With +PTP option installed
PTP version 2 support on Time
Ethernet port
DARS & AES Test Generator OutputsWith +SDTG, HDTG or 3GTG installed
Standard
Unbalanced
SMPTE ST 276-1single ended AES (24-bits) (1V p-p into 75?)
Balanced
AES3 (24-bits) (4V p-p 110? terminated)
Number of Outputs
DARS
1 unbalanced, 1 balanced
AES Test Gen
2 unbalanced, 2 balanced
Connector
Unbalanced
BNC per IEC 61169-8 Annex A
Balanced
Removable Terminal Strip
Sampling Rate
48kHz
Impedance
Unbalanced
75? unbalanced
Balanced
110? balanced
AES Tones
Menu selectable
Genlock InputVideo/10MHz selectable
Type
Autodetects standard SMPTE ST 170 (NTSC-M), ITU-R BT.1700-1 (PAL-B), Color Black 1V p-p with optional VITC and 10- field pulse
HD Tri-level Sync (same HD standards as sync outputs)
Number of Inputs
2 Loop thru
High impedance, isolated, differential external termination required
Connector
BNC per IEC 61169-8 Annex A
Return Loss
> 40dB to 10MHz (with external 75? termination)
Input Level Range
Video
-3.5dB (double-terminated) to +6dB (un-terminated)
10MHz
0.3V p-p to 4.0V
Frequency Lock Range
Wide Mode
±15ppm min
Narrow Mode
±0.1ppm min
Analog Composite Video Test Signal GeneratorWith +SDTG, HDTG or 3GTG installed
Standard
SMPTE ST 170 (NTSC-M)
ITU-R BT.1700-1 (PAL-B)
Number of Outputs
2
Connector
BNC per IEC 61169-8 Annex A
Signal Level
1V p-p nominal
DC Offset
0V ±0.05V
Output Impedance
75?
Return Loss
> 40dB to 6MHz
Frequency Response
±0.1dB to 5.5MHz
SNR
> 75dB rms
Analog Audio Tone GeneratorWith +SDTG, HDTG or 3GTG installed
Number of Outputs
2
Type
Balanced analog audio
Connector
6 pins on 16-pin removable terminal strips
Output Impedance
66?
Signal Level
-30 to +10dBu into 10k? load
DC Offset
< 10mV
Noise Floor
< -90dBu, unweighted
THD+N
< -100dB with 1kHz @ +10dBu into 10k? load
SDI Test Generators
Standards
+SDTG Option
SMPTE ST 259-C (270MB/s)
+HDTG Option
SMPTE ST 259-C (270MB/s), SMPTE ST 292-1 4:2:2
+3GTG Option
SMPTE ST 259-C (270MB/s), SMPTE ST 292-1 4:2:2, SMPTE ST 372 dual link, and SMPTE ST 424, For SMPTE ST 2048-2 and SMPTE ST 2036-1 2160 line formats
Quad link SMPTE ST 292-1 4:2:2
Quad link SMPTE ST 424 4:2:2
SMPTE ST 425-3 Dual link 3GB/s
SMPTE ST 425-5 Quad link 3GB/s
Number of Generators
4 (2 outputs per)
Embedded Audio
Up to 4 audio groups as specified in SMPTE ST 299-1 or SMPTE ST 272 Selectable tone frequencies (from 20Hz to 12kHz) and audio group
Connector
BNC per IEC 61169-8 Annex A
Signal Level
800mV nominal drive (1600mV drive for 5601AC02)
DC Offset
0V ±0.5V
Rise And Fall Time
100ps HD/3G, 600ps SD
Overshoot
< 10% of amplitude
Jitter
< 0.2UI
Return Loss
> 15dB to 1.5GHz
> 10dB to 3GHz
General Purpose Inputs and Output
Number of Inputs
2
Number of Outputs
2 (function menu selectable)
Output Type
Opto-isolated, active closure to GND, 20k? pull-ups to +5V
Input Type
Opto-isolated, senses closure to GND, pull-ups to +5V
Connector
4 pins plus 2 ground pins on DB-15 female
Physical
Dimensions
19″ W x 1.75″ H x 11.5″ D
(483mm W x 45mm H x 292mm D)
Weight
8lbs (3.5kg)
Electrical
Voltage
Auto ranging 100 to 240V AC, 50/60Hz
ConfiGuration
Optional redundant supply available
Power
90 watts max (all options installed)
Safety
TüV Listed
Complies with EU safety directives
EMI/RFI
Complies with FCC Part 15 Class A
Complies with EU EMC Directive
5601MSC Master SPG/Master Clock System
Call for Price - Day Rate
The 5601MSC Master Sync and Clock Generator is a broadcast quality, master sync pulse generator (SPG) and a master clock. It provides all of the synchronizing signals needed in a 21st century TV station or post production facility at the same time as solving the problem of locking the in-house master clock system to the master video sync pulse generator.
A high stability, temperature controlled oscillator, provides the 5601MSC with better than 1.0×10-8 (or 0.01ppm) frequency reference. The free running drift of this 10MHz reference will be less than 0.1Hz (which amounts to less than one millisecond time drift per day). This guarantees that any frequency drift, with time and temperature, will be within the tolerances expected from the best SPGs or master clocks available in the industry. The 5601MSC may also be referenced to an external 5MHz or 10MHz master oscillator if higher stability is required. Both the SPG and the Master Clock section of the 5601MSC may be referenced to high stability time and frequency standards present in the Global Position System (GPS) by adding the GPS option (+GP). The 5601MSC may also be referenced to high stability time and frequency standards present in the Global Navigation Satellite System (GLONASS) by adding the GPS/GLONASS option (+GPSG).
The SPG section of the 5601MSC provides six timeable reference outputs. These six BNC outputs may be configured to provide independently timed color black (black burst) outputs or independently timed HDTV tri-level sync outputs. Each color black output can optionally carry vertical interval time code (VITC) on a user specified set of lines. Additionally, each output can provide 10MHz, 5MHz, PAL Subcarrier, NTSC Subcarrier, 1 PPS, 1/1.001 PPS, 6/1.001 PPS, PAL color frame pulse and 48kHz wordclock.
Specifications
SMPTE ST 296 (720p/59.94, 720p/60, 720p/50, 720p/30, 720p/24)
Ethernet 10 Base-T IEEE 802.3 standard for 10MB/s baseband CSMA/CD local area network
NTP port with +T option installed
Time must be referenced to GPS, LTC, VITC or have been synchronized via modem within the last 10 days (as per RFC1305)
Ethernet port
HD Tri-level Sync (same HD standards as sync outputs)
High impedance, isolated, differential external termination required
ITU-R BT.1700-1 (PAL-B)
Quad link SMPTE ST 292-1 4:2:2
Quad link SMPTE ST 424 4:2:2
SMPTE ST 425-3 Dual link 3GB/s
SMPTE ST 425-5 Quad link 3GB/s
> 10dB to 3GHz
(483mm W x 45mm H x 292mm D)
Complies with EU safety directives
Complies with EU EMC Directive
Related products
Sony RCP-1500 Remote Control Panel
Call for Price - Day Rate Call for PriceSONY MVS-8000 GSF MULTI FORMAT SWITCHER PROCESSOR WITH 3M/E PANEL
Call for Price - Day Rate Call for PriceUHD 4K FLYPACK SYSTEM
Call for Price - Day Rate Call for Price