The JK Audio ComPack telephone / audio interface bridges the gap between cell phones, analog phones, PBX systems and professional audio sources. The ComPack is designed for Remote Broadcasts, IFB feeds, or telephone interviews. The provided balanced XLR input accepts signal from line level sources and microphones. The 2.5mm jack connects the ComPack to any cell phone with an ear-piece jack. Standard analog phones connect to the RJ-11 phone jack provided. A 3-pin XLR intercom provides a bonus feature. The ComPak also functions as a simple telecom interface for an existing belt-pack intercom system. This feature provides a full-duplex, always-on connection to any telephone network.
FEATURES:
Telephone / Audio Interface
A complete interface between audio sources and analog phones and cell phones. Designed for telephone interviews, broadcast, IFB and more.
Cell and Analog Phone Interface
The ComPack features a standard RJ-11 jack for interfacing with analog phones as well as a 2.5mm cell phone headset jack.
Mic & Line Level Input
The balanced XLR input excepts either microphone or line level signal. A Mic /Line switch is provided.
Telecom Interface Feature
As a bonus feature, an XLR intercom link is provided. This allows the ComPack to be used as a simple telecom interface for belt-pack intercom systems.
Extended Battery Life
The ComPack is supplied with an AC power supply and will operate for up to 20 hours on a single 9 volt battery.
JK AUDIO COMPACK UNIVERSAL PHONE INTERFACE
Call for Price - Day Rate
The JK Audio ComPack telephone / audio interface bridges the gap between cell phones, analog phones, PBX systems and professional audio sources. The ComPack is designed for Remote Broadcasts, IFB feeds, or telephone interviews. The provided balanced XLR input accepts signal from line level sources and microphones. The 2.5mm jack connects the ComPack to any cell phone with an ear-piece jack. Standard analog phones connect to the RJ-11 phone jack provided. A 3-pin XLR intercom provides a bonus feature. The ComPak also functions as a simple telecom interface for an existing belt-pack intercom system. This feature provides a full-duplex, always-on connection to any telephone network.
FEATURES:
Telephone / Audio Interface
A complete interface between audio sources and analog phones and cell phones. Designed for telephone interviews, broadcast, IFB and more.
Cell and Analog Phone Interface
The ComPack features a standard RJ-11 jack for interfacing with analog phones as well as a 2.5mm cell phone headset jack.
Mic & Line Level Input
The balanced XLR input excepts either microphone or line level signal. A Mic /Line switch is provided.
Telecom Interface Feature
As a bonus feature, an XLR intercom link is provided. This allows the ComPack to be used as a simple telecom interface for belt-pack intercom systems.
Extended Battery Life
The ComPack is supplied with an AC power supply and will operate for up to 20 hours on a single 9 volt battery.
Specifications
Input:
Female XLR Input (mic/line switchable)
3.5mm Line Input
Output:
Male XLR Output
1/4″ Phone Output
Handset: 1/4″ Phone Output
Isolation: 1500 VAC
Phone Line: RJ11C
Impedance
Inputs
XLR: 1k ohm, -10 mV RMS (-35 dBm nom) mic, +5 dBm line
3.5mm: 20k ohms, -10 dBm RMS
Outputs
XLR: 600 ohms balanced
1/4″ Phone: intercom mode – Pin 3 bidirectional unbalanced
Headphone: 8 ohms, 500mW
Power Requirements: operates for approximately 20 hours on one 9 Volt battery
SIZE:
8″ x 3″ x 2.2″
203 x 76 x 56 mm
WEIGHT:
1.5 lb (0.7 kg)
Related products
LECTROSONICS RECEIVER UCR211
Call for Price - Day Rate Call for PriceYAMAHA RIO 1608-D
Call for Price - Day Rate Call for PriceYAMAHA QL1 Mixer CONSOLE
Call for Price - Day Rate Call for Price