ESE LX-5112 SELF-SETTING ANALOG CLOCK

The LX-5112 is a Wall Mount Analog Clocks with a 12″ viewing diameter. The unit is designed to operate as a Time Code Reader, Stand-Alone Clock or Impulse Clock. They can read, decode and display time information from most any Master Clock or other source of time code. A rear-mounted DIP switch permits the clock to display time as received from a source of SMPTE/EBU, ASCII or ESE Time Code (the Impulse Clock mode may be replaced with an IRIG-B input mode as a factory option). After a very simple “set-up” procedure and receipt of time code, the unit automatically sets itself to the exact time and continuously slaves to the time code (If time code is lost, an error indicator is lit and the clock continues counting while referencing an internal crystal time base).

Other user defined modes of operation allow these clocks to be synchronized to a Master Clock with a 1 PPS alternating 12 or 24 VDC “Favag” type output or to be set to real time and allowed to run based on its internal crystal oscillator. The second hand is completely silent and can be programmed for “Sweep” mode or “Step” mode.

The initial set-up allows the unit to have its hours (and/or minutes) offset to that of another time zone. Also, since the clock can continuously track time code, there is no need to twice annually compensate for daylight saving time (assuming the Master Clock automatically adjusts itself accordingly).

FEATURES:
Silent Operation
Simple Setup
Self-Setting with Time Code Input
Reads ESE, ASCII, SMPTE or EBU Time Code
Stand-Alone, Impulse & Reader Modes
Sweep or Step Second Hand
12″ Dial
Viewing Distance 20, 60, or 80 feet
Battery Back-up
Time Zone Offset
Time Code Loss Indicator
Variable Brightness Lighted-Dial Option
Rackmount
220-240 VAC (110-120 VAC is standard) & UL Options available