Type: Active RF distribution system with ceramic filtering
Inputs: Two 50 Ohm BNC jack on rear panel
Third order intercept: +27dBm at input
Type: 16 BNC jacks on rear panel. Eight jacks per antenna.
Isolation: 25dB min, any output to any output
Any output can be open, shorted, or terminated without affecting other outputs.
Splitter type: Wilkinson 1/4 wave
Frequency Range: 470 to 865MHz, factory set (See serial number sticker on
side panel for frequency range of your particular unit.)
Filter bandwidth: 16 to 50MHz, factory set
Input/Output RF gain 1 to 2dB at center of band
Power Requirements: 95-240VAC or 11 to 14VDC
Overload protection provided by internal auto-reset circuit breaker.
Power consumption: Nominally 110-220VAC, 10 Watts
Nominally 340mA at 12VDC
19″ x 7″ x 1.75″
483 x 178 x 45 mm
2.6 lbs. (1.2 kg)